MULTIline F
The airlay unit mod. f is a purely aerodynamic forming system. It is the preliminary batt forming and feeding system for the following airlay carding units p or s, c or d. Thanks to the weighing system in exit, PID control and possibility to adjust the formation chamber, the airlay f can also be used […]
MULTIline H
The airlay unit MULTIline mod. h is particularly designed for basis weights from medium to heavy and extremely heavy. Opening action thanks to a drum clothed with steel pins. Particularly suitable for short fibers, coarse natural fibers and non-fibrous mixes, but it can accept any kind of fiber. It can be integrated into our MULTIline […]
MULTILine L
The web forming unit mod. L is a volumetric feeder with special characteristics. The web forming chute in exit is complete with variation of the chamber gap and vibrating wall. In this way the feeder L works as a standard volumetric feeder. The exit chute is also equipped with a series of blowing motorfans which […]
MULTIline C
The Airlay unit mod. c works with a combination of several carding cylinders clothed with rigid wires, followed by a top + bottom air shaping system. The airlay card model C allows the maximum fiber opening degree among the MULTIline range of machines, making it particularly suitable for nonwovens with light and medium gsm, starting […]
MULTIline D
The airlay card mod. D works on the same principle of the airlay card mod C. In addition to the standard top + bottom air suctions in exit, the airlay card in this version is equipped with a doffing system similar to the one of traditional roller cards. The doffing system allows to produce light […]
MULTIline P
The airlay card model P performs a homogeneous opening and blending of the fibers thanks to its first section composed of carding cylinders; at the same time it allows to obtain nonwovens of medium and high basis weights, thanks to a particularly powerful and wide-adjustable suction system in exit. The combination of these two characteristics […]
MULTIline S
Special design that allows the aerodynamic web formation of fiber mixes or fiber + powder mixes, all in one machine. Unlike with traditional airlay technologies, using the airlay card mod. S there isn’t the need to set up two separate lines – one dedicated to resin curing and one to bonding with low melt fibers […]
Multiline FP
For delicate, easily breakable fibres, such as glass and coconut. For medium-high weights and synthetic, natural, recycled fibres.. From 200 to 10,000 g/m²
Multiline FC
With the FC combination the fibers are more worked and more open than the combination with only pre-carding.
Multiline FPC
The Airlay system MULTIline is designed to form nonwoven products from all types of libers: long synthetic fibers, coarse natural fibers, short recycled fibers, breakable mineral fibers and non-fibrous components such as resins, foam pieces, shredded cardboard, recycled leather. All fibers can be processed in the same airlay MULTIline machine, in the same line and […]
