MULTIline F

f mulitiline formatore pneumatico

The airlay unit mod. f is a purely aerodynamic forming system. It is the preliminary batt forming and feeding system for the following airlay carding units p or s, c or d.  Thanks to the weighing system in exit, PID control and possibility to adjust the formation chamber, the airlay f can also be used […]

MULTILine L

L MULTILINE formatore

The web forming unit mod. L is a volumetric feeder with special characteristics. The web forming chute in exit is complete with variation of the chamber gap and vibrating wall. In this way the feeder L works as a standard volumetric feeder.  The exit chute is also equipped with a series of blowing motorfans which […]

MULTIline C

C_multiline c Airlay cardante per pesi medio bassi

The Airlay unit mod. c works with a combination of several carding cylinders clothed with rigid wires, followed by a top + bottom air shaping system. The airlay card model C allows the maximum fiber opening degree among the MULTIline range of machines, making it particularly suitable for nonwovens with light and medium gsm, starting […]

MULTIline D

D multiline CARdatore a pettine3

The airlay card mod. D works on the same principle of the airlay card mod C. In addition to the standard top + bottom air suctions in exit, the airlay card in this version is equipped with a doffing system similar to the one of traditional roller cards. The doffing system allows to produce light […]

MULTIline P

p airlay

The airlay card model P performs a homogeneous opening and blending of the fibers thanks to its first section composed of carding cylinders; at the same time it allows to obtain nonwovens of medium and high basis weights, thanks to a particularly powerful and wide-adjustable suction system in exit.  The combination of these two characteristics […]

MULTIline S

Special design that allows the aerodynamic web formation of fiber mixes or fiber + powder mixes, all in one machine. Unlike with traditional airlay technologies, using the airlay card mod. S there isn’t the need to set up two separate lines – one dedicated to resin curing and one to bonding with low melt fibers […]

Multiline FPC

The Airlay system MULTIline is designed to form nonwoven products from all types of libers: long synthetic fibers, coarse natural fibers, short recycled fibers, breakable mineral fibers and non-fibrous components such as resins, foam pieces, shredded cardboard, recycled leather. All fibers can be processed in the same airlay MULTIline machine, in the same line and […]

Multiline FPD

The FPD combination allows to process any type of fiber from 20 to 10.000 gsm. Ideal for light weights to feed vertical folders for sectors such as hygiene and filtration.