Technoplants has designed an high efficiency thermal bonding oven.
The FHR heat recovery system, allow an additional energy saving that reduce significantly oven consumption.
The machine has a perfect cross air control that allows an homogeneous bonding through the width, in a wide range of fan speed.
The independent air management allows to blow hot air from top to bottom, from bottom to top or from both directions, to satisfy every production needs.
The air through bonded oven is especially designed for light weight products (20 to 150 gsm) required in the hygiene market as Acquisition Distribution Layer.
Air heating can be direct gas or with heat exchanger to fit every customer working conditions.
Acquisition layers for hygiene
Internal symmetrical configuration of the pressure chamber and air ducts, for a high accuracy of temperature and air speed in case of large working widths.
Heat recovery is available for all type of ovens.
Energy recovery of the exhausted air coming from the heating and cooling sections, can be used for web pre heating or air pre heating.
The system allows a significant saving and reduction of pollution due to air heating.
Specially designed alternating slot nozzles, which blow the hot air directly through the material from top to bottom, from bottom to top or from both directions.
The distance of the upper belt can be adjusted by control panel up to 200 mm for the standard version.
The lifting screw jacks also move the structure with the calibrating roller and the suction hoods.