Technoplants high speed winders, with or without cardboard cores in conjunction with our combined slitting and cross cutting units, offer the ability to automatically cut, thread, wind and doff a very wide range of nonwoven products.
Material ranges start as low as 40 gsm and go up to nonwovens well beyond 1.000 gsm needle punched, thermobonded, chemical bonded or calandered bonded.
Technoplants can also provide a whole series of intermediate or entry level machines and even used machines, depending on customers requests.
Roofing
Automotive felts
Mattress padding
High loft
High stiffness
High speed
Insulating wadding
Geo textiles
Core less
Working width | up to 8000 mm |
Product weights | from 80 to 3000 gsm |
Roll diameter | up to 1500 mm |
Production speed | up to 50 m/min |
Working width | up to 5000 mm |
Product thickness | up to 300 mm |
Roll diameter | up to 1200 mm |
Production speed | up to 50 m/min |
Working width | up to 6000 mm |
Product weights | from 40 gsm |
Roll diameter | up to 1500 mm |
Production speed | up to 100 m/min |
Groups designed for the continuous trimming, slitting, cutting and winding for a wide range of nonwoven products.
Groups designed for the continuous trimming, slitting, cutting and winding for a wide range of nonwoven products.
Our fork range winders allow to wind high loft materials without any winding core.
Volume reduction with our range of compressive winders.
For the taping of nonwoven rolls with cling film.
Automatic positioning and cutting of the cling film.